Ready to Use Printing Pastes Whites and Specialities

» Ready to Use Printing Pastes Whites and Specialities
» RTU PRODUCTS FOR SPECIAL EFFECTS
» Whites
» Puffs
» Pearlescent
» Glitters and metallic effects
» Water based plastisols
» Discharge pigment printing paste

All products in this category are packed having pH and viscosity value suitable for printing conditions. That is why, they are called as READY TO USE pastes.
High fastness properties can be achieved by applying these products on most types of fabric.

White pastes

Whites are ready made waterbased printing pastes with an excellent coverage on dyed ground.

White CW

Stabilized aqueous dispersion of titanium dioxide, with high covering power.

White TP

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with high covering power.

White RW

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with economic way with high covering and whiteness.

White PW new

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with high covering power, especialy on roller printing machines.

White BR-01

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with high covering and whiteness

PIGMAPLAST PWS

Ready-for-use printing paste, PVC and phthalate free, especially developed for white printing on elastic and knitted dyed fabrics.
The use of this product grants good degree of white, good hiding power and high elasticity that allows prints not to break or to crack when the fabric is stretched. Dry and wet plus wash fastness are very good.

Ready Printing pastes for Dark Grounds

These products are particularly suitable to print on dyed grounds for their good covering powers and high colour performances.

White OW-P

White OW-P is a dark ground paste used for water based printings.
Its particular formulation and its high dispersion degree allow to obtain high quality prints.
Print runnability is excellent both on flat bed and rotary machines; on white and pastel grounds,
White OW-P can be cut with pigment printing paste at any percentage and printed with good hiding and white effects.
Dry and wet rub plus wash fastness are excellent. It can be used also in serigraphy.

Pigmalac OPAQUE

Pigmalac Opaque is a dark ground paste used for water based printings.
It is an elastic and opaque white, with even printing effects, especially on silk and synthetic fibre fabrics alongside dyestuffs. Very soft hand and excellent fastness.

White OW-W

White OW-W is a dark ground paste used for water based printings.
Ready-made printing paste for printing bright colours on dyed ground. Its particular formulation and its high dispersion degree allow obtaining high quality prints. Print runnability is excellent both on flat bad and rotary machines; on white and pastel grounds. It is suitable for wet on wet printing. Dry and wet rub plus wash fastness are excellent.

White OW-T

White OW-T is a dark ground paste used for water based printings.
Ready-made printing paste for printing bright colours on dyed ground. Its particular formulation and its high dispersion degree allow obtaining high quality prints. Print runnability is excellent both on flat bad and rotary machines; on white and pastel grounds. It is suitable for wet on wet printing. It shows good washing fastness and extremely soft handling properties on most fabrics.

Glitters

Glitters are ready made water based printing paste for glitter printing.

Glitter Paste

It is a ready-made aqueous printing paste for glitter printing on most textile fabrics.
This specially developed product of high quality is based on flexible, highly resistant soft binders so that the printed fabrics obtain soft handle and excellent fastness.

Pearlescent Pastes

Pearlescent pastes are ready made water based printing pastes which gives a pearlescent appearance to the printed fabric.

Pigmapearl

It is a ready-made specially formulated aqueous printing paste which gives an attractive pearlescent appearence to the printing fabric.

Pigmapearl Gold

It is a ready-made specially formulated aqueous printing paste which gives an attractive golden appearence to the printing fabric, very similar to the effect obtained with bronze powder.

Pigmapearl Brill. Gold

It is a ready-made specially formulated aqueous printing paste which gives an attractive golden appearence to the printing fabric, with very high brilliance.

Metallic Pastes

Metallic pastes are a ready-made water based printing pastes for metallic effect printing with metallic powder.

Metallic Paste

It is a ready-made aqueous printing paste for metallic printing on most textile fabrics.
It gives a soft handle, good elasticity and good rubbing fastness.

Metallic Paste EB

It is a ready-made aqueous printing paste for metallic printing on most textile fabrics, with very high brilliance.
It gives a soft handle, good elasticity and good rubbing fastness.

Puffing Pastes

PUFFS are ready made water based printing pastes which gives the three dimensional print patterns.

Pigmapuff SW

Expanding printing paste for relief effects. It is a ready-made specially formulated aqueous printing paste which unique effects develop after drying and curing.
It is specially formulated ready-made printing paste which expands after drying and curing. Printed fabric should be dried at 80 – 85°C (3-4 min.) and cured for 3-4 minutes at 135 – 140°C. If these temperature are exceeded the puffing effect decreases.

Pigmapuff HT

Expanding printing paste for relief effects. It is a ready-made specially formulated aqueous printing paste which unique effects develop after drying and curing.
It is specially formulated ready-made printing paste which expands after drying and curing. Printed fabric should be dried at 80 – 85°C (3-4 min.) and cured for 3-4 minutes at 165 – 170°C. If these temperature are exceeded the puffing effect decreases.

Pigmapuff Elastic

Expanding printing paste for relief effects with high elasticity.
It is specially formulated ready-made printing paste which expands after drying and curing. Printed fabric should be dried at 80 – 85°C (3-4 min.) and cured for 3-4 minutes at 135 – 140°C. If these temperature are exceeded the puffing effect decreases.

Water Based Plastisol Pastes

Pigmaflex FJ

Printing paste for gloss print. It is a ready-made aqueous printing paste which forms a transparent and glossy film

Jel Print Paste

Printing paste for plastisol effect. It is a ready-made aqueous printing paste which forms a transparent and glossy film.

Discharge Printing Pastes


Pigmacoroz PC

Water-based printing paste for discharge printing with Decrolin/Rongalit.
Pigmacoroz PC is recommended for single colour printing on flat and rotary printing machines

Pigmacoroz KR

Water-based printing paste for discharge printing with Decrolin/Rongalit.
Pigmacoroz KR is suitable for multicolor printing on flat and rotary printing machines

Pigmacoroz W 100

Water-based printing paste for white discharge printing with Decrolin/Rongalit.
Pigmacoroz W 100 is suitable for single colour printing on flat and rotary printing machines

Other Printing Effects

Glow In The Dark

Ready-made, specially formulated water-based printing paste which is characterised by its ability to absorb and store natural or artificial light and emit it in the form of visible light when it is dark.

Thermocolors

Heat sensetive colour pastes. These colours are sensetive between 26 and 31 C.