RTU PRODUCTS FOR SPECIAL EFFECTS

• Whites
• Puff printing pastes
• Pearlescent
• Glitters and metallic effects
• Water based plastisols
• Discharge pigment printing paste

All products in this category are packed having pH and viscosity value suitable for printing conditions. That is why, they are called as READY TO USE pastes.
High fastness properties can be achieved by applying these products on most types of fabrics.
WHITES are ready made Waterbased printing pastes with an excellent coverage on dyed ground.
PUFFS are ready made waterbased printing pastes which gives the three dimensional print patterns.
PEARLESCENT are ready made water based printing pastes which gives a pearlescent appearance to the printed fabric.
GLITTERS are ready made water based printing paste for glitter printing.
METALLIC PASTE is a ready-made water based printing paste for metallic effect printing with metallic powder.

Whites

White CW

Stabilized aqueous dispersion of titanium dioxide, with high covering power.

White TP

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with high covering power.

White RW

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with economic way.

White PW

Stabilized aqueous dispersion of titanium dioxide and inorganic charges, with high covering power, especialy on roller printing machines.

Pigmaplast PWS

Ready-for-use printing paste, PVC and phthalate free, especially developed for white printing on elastic and knitted dyed fabrics.
The use of this product grants good degree of white, good hiding power and high elasticity that allows prints not to break or crack
when the fabric is stretched. Dry and wet plus wash fastness are very good.

White OW-P

Ready-made printing paste particularly suitable to print on dyed grounds for its good covering power and high colour performance.
Its particular formulation and its high dispersion degree allow to obtain high quality prints.
Print runnability is excellent both on flat bad and rotary machines; on white and pastel grounds,
White OW-P can be cut with pigment printing paste at any percentage and printed with good hiding and white effects.
Dry and wet rub plus wash fastness are excellent. It can be used also in serigraphy.

Pigmalac Opaque

Ready-for-use printing paste. It is an elastic and opaque white, with even printing effects, especially on silk and synthetic fibre fabrics alongside dyestuffs.
Very soft hand and excellent fastness. It is suitable for wet on wet printing up to 6 colours.

Printing pastes

Glitter Paste

It is a ready-made aqueous printing paste for glitter printing on most textile fabrics.

Pigmapearl

It is a ready-made specially formulated aqueous printing paste which gives an attractive pearlescent appearence to the printing fabric.

Pigmapearl Gold

It is a ready-made specially formulated aqueous printing paste which gives an attractive golden appearence to the printing fabric very similar to the effect obtained with bronze powder..

Pigmapearl Brillant Gold

It is a ready-made specially formulated aqueous printing paste which gives an attractive golden appearence to the printing fabric, with very high brilliance.

Metallic Paste

It is a ready-made aqueous printing paste for metallic printing on most textile fabrics.

Metallic Paste EB

It is a ready-made aqueous printing paste for metallic printing on most textile fabrics, with very high brilliance.

Pigmapuff SW

Expanding printing paste for relief effects. It is a ready-made specially formulated aqueous printing paste which unique effects develope after drying
and curing. Normally a one process drying and curing is used at 130 C for 3 minutes.

Pigmapuff HT

Expanding printing paste for relief effects. It is a ready-made specially formulated aqueous printing paste which unique effects develope after drying
and curing. Normally a one process drying and curing is used at 160 C for 3 minutes.

Pigmapuff Elastic

Expanding printing paste for relief effects with high elasticity. It is a ready-made specially formulated aqueous printing paste which unique effects
develope after drying and curing. Normally a one process drying and curing is used at 160 C for 3 minutes.

Pigmaflex FJ

Printing paste for gloss print. It is a ready-made aqueous printing paste which forms a transparent and glossy film.

Jel Print

Printing paste for plastisol effect. It is a ready-made aqueous printing paste which forms a transparent and glossy film.

Glow in the Dark

Ready-for-use, solventless printing paste for use with brightness, afterglow and emission color with excitation many kind of light source.

Thermocolors

Heat sensitive colour paste. These colours are sensitive between 26 and 31 C.